Moog Parison Programmers

Over 25 Years experience of supply to the Blow Moulding Industry

For over 25 years we have specialized in supplying parison programming systems for all types of blow moulding machines. Our special relationship with Moog Controls Ltd allowed us to manufacture special versions of the Moog 25 point programmer and service Moog servo valve and Moog proportional valves.

Moog has dozens of companies worldwide and a number of them have been producing various types of parison programming systems for almost 30 years. A Japanese machine arriving in the UK may be fitted with a Moog Digipack, an Italian machine with a Moog Bloc 64, a German machine with a Moog 25 point etc.. In the UK we standardized on the Moog 25 point programmer because it was the most user friendly system. It was also easy for end users to set up and fault find. We sold hundreds of these, and with Moog's permission, we produced special versions of the 25 point programmer for Hayssen (now Uniloy-Milacron), Serta (now Sidel) Rocheleau, and a number of large end-users. In addition to the parison programmer we also offer the programming cylinder with servo valve, transducer, and hydraulic modifications.

Which Parison Programmer is best for your application?

Moog MPC ‘Screen-type’ parison programmer

Screen Type

Most packaging applications do not require’hundreds’ of profile points. In fact 10 to 30 are usually adequate. For larger mouldings (20 to 200 lt) 50 to 100 points are needed to achieve good wall thickness control.

Moog25 pointparisonprogrammer.jpg

Moog ‘25 point’ parison programmer

Slider Type

‘Slider’ type systems are very user friendly and are still the preferred choice of most companies. ‘Screen’ type programmers often have many high-tech features, but may also need ‘higher tech’ setters. Moog MPC ‘Screen-type’ parison programmer Moog ‘25 point’ parison programmer

Good stocks of all Moog spare parts

Although Moog no longer sell the 25 point system we still have good stocks of all spare parts and complete systems. For new applications we can still offer traditional 'slider' programmers, but we can also recommend the Moog MPC-400 system. This is a modern 'screen' type parison programmer with dozens of features to meets the need of every blow moulding application. We can also offer programmers to replace obsolete systems of any make e.g. Hunkar, Femit, Profiloc, Moog etc.

Power packs

Is a separate hydraulic power pack necessary? NO! Our experience has shown that a supply taken from the machines existing hydraulic supply, fed through a good quality filter to a modern servo valve will be totally reliable. We have actually improved the reliability of some machines by removing the separate power pack! There are occasions when a separate pack is better and we have our own in-house manufactured hydraulic power pack specifically for this application.

Parison programming really is our area of expertise!

Hesta Head Conversion

We have developed an adapter plate that enables‘conventional’ servo valves to be used in place of the special H+L device. This means you can replace the Hesta parison programmer with virtually any other parison programmer such as Moog, Hunkar, Barber Colman, Siemens. Click here for more